DeWalt 16 nail gun

This puppy can stick a 6-D nail into a 2×4 from 200 yards. Meaning you can chill in a lawn chair and snap together a dog house. Just make sure you’re wearing Kevlar and a bullet proof eye mask.

Created by David Wiggins, Dave says, “I’d just picked up a new (to me) M-16 and was in the process of fixing it up a little. It needed new furniture anyway, so I sourced the safety yellow stock, guard, and grip. Then, I went down to the DeWalt factory service place a few miles from the house to get a sticker. There, I saw they had brand new battery casings, so I picked up one of those too. I got home, found a short magazine , and got to work.

I traced an approximation of the size hole I’d need in the top of the plastic casing, and slowly dremeled away the plastic I didn’t need. Once done, I epoxied the magazine body into the hole and quickly assembled everything so that I could make sure it all looked right before the epoxy set up. Once the epoxy cured, I took the mag back apart, cleaned up some of the bigger resin boogers, and then masked the top of the mag and hit it w/ some mil-spec glossy black coating (aka Krylon).”

via Tool Monger